Axis DVR5, Instruction Manual, Page: 4 / 16

4
6. Fault Handling
5HVWRUHWRIDFWRU\GHIDXOWVHWWLQJV3UHVVWKHUHVHWEXWWRQ
2. Format the memory card.
3. Do not set other functions except for the time.
4. Record the video again.
COMMON OPERATIONS
Date and Time Setting
,QYLGHRPRGHVWDQGE\,ILQUHFRUGLQJVWDWXVSOHDVHVWRSE\SUHVVLQJRQRƬEXWWRQ
2. Double press “M” button to enter video setup menu.
3. Choose “Date and Time” option by pressing “up” and “down” button.
4. Press “0” button once to enter into “Date and Time” settings.
5. Press “up” and “down” button to set numbers.
6. Press the “0” button once to set the next number.
7. After setting up, press “M” button to exit.
Format the Memory Card
1. In the standby state of video mode (If it is at recording status, please stop it by
SUHVVLQJRQRƬEXWWRQ
2. Double press “M” button to enter the setup menu.
3. Choose “Format” by pressing “up” and “down” buttons.
3UHVVpqEXWWRQWRFRQƮUP
Restart and Reset
3UHVVpUHVHWqEXWWRQQH[WWRWKHpRQRƬqEXWWRQXVLQJDSRLQWHGREMHFW
Restore Defaults
1. ,QYLGHRPRGHVWDQGE\,ILQUHFRUGLQJVWDWXVSOHDVHVWRSE\SUHVVLQJpRQRƬqEXWWRQ
2. Double press “M” button to enter the setup menu.
3. Choose “Default Setting” by pressing “up” and “down” buttons.
3UHVVpqEXWWRQWRFRQƮUP
3DUNLQJ0RQLWRULQJ)XQFWLRQ2ƬE\'HIDXOW
Note: When this function is on, the data recorder does not need an external power
supply. It will automatically start to record for 30 seconds and then automatically shut
down.
1. Enter standby state of video mode (If set to recording, please stop by pressing
RQRƬEXWWRQ
2. Press “M” button once to enter the setup menu.
3. Choose “Parking Monitoring” option by pressing “up” and “down” buttons.
4. Press “0” button to enter the submenu.
5. Choose the sensitive option of “High” “Medium” “Low” by pressing “up” and “down”
buttons. Press “0” to save and press “M” to exit.
COMMON OPERATIONS