manualshive.com logo in svg

Axis D4100-E, User Manual, Page: 23 / 37

Share
Download
Axis D4100-E User Manual Download Page 23

AXIS D4100-E Network Strobe Siren

The device interface

QoS

: Change the QoS layer for the packet flow.

Last Will and Testament message

The Last Will Testament (LWT) lets a client provide a testament along with its credentials when connecting to the broker. If the
client disconnects ungracefully at some point later (maybe because his power source died), it can let the broker deliver a message
to other clients. This LWT message has the same form as an ordinary message and gets routed via the same mechanics.

Send message

: Turn on to send messages.

Use default

: Turn off to enter your own default message.

Topic

: Enter the topic for the default message.

Payload

: Enter the content for the default message.

Retain

: Select to keep the state of client on this

Topic

QoS

: Change the QoS layer for the packet flow.

MQTT publication

Use default condition prefix

: Select to use the default condition prefix, that is defined in the

MQTT client

tab.

Include condition name

: Select to include the topics that describe the condition in the MQTT topic.

Include condition namespaces

: Select to include ONVIF topic namespaces in the MQTT topic.

Include serial number in payload

: Select to include the device’s serial number in the MQTT payload.

Add condition

: Click to add a condition.

Retain

: Defines which MQTT messages are sent as retained..

•

None

: Send all messages as non-retained.

•

Property

: Send only stateful messages as retained.

•

All

: Send both stateful and stateless messages as retained.

QoS

: Select the desired level for the MQTT publication.

MQTT subscriptions

Add subscription

: Click to add a new MQTT subscription.

Subscription filter

: Enter the MQTT topic that you want to subscribe to.

Use device topic prefix

: Add the subscription filter as prefix to the MQTT topic.

Subscription type

:

•

Stateless

: Select to convert MQTT messages into a stateless message.

•

Stateful

: Select to convert MQTT messages into a condition. The payload is used as the state.

QoS

: Select the desired level for the MQTT subscription.

SIP

SIP settings

23

Summary of Contents for D4100-E






































Reviews:

No comments