Axis C1610-VE User Manual Download

Page: 41 / 46

AXIS C1610-VE Network Sound Projector

Specifications

Product overview

Mesh

Microphone disable switch on page 41

SD card slot

I/O connector on page 42

Status LED indicator, see LED indicators on page 41

Control button on page 41

Network connector on page 42

Audio in

LED indicators

Status LED

Indication

Unlit

Unlit for normal operation.

Green

Steady green for normal operation.

Amber

Steady during startup and when restoring settings.

Red

Slow flash for failed upgrade.

Buttons

Control button

The control button is used for:

•

Calibrating the speaker test. Press and release the control button and a test tone is played.

•

Resetting the product to factory default settings. See

Reset to factory default settings on page 38

Microphone disable switch

For location of the microphone disable switch, see

Product overview on page 41

The microphone disable switch is used to mechanically turn the microphone

OFF

. The factory default setting for this switch

Summary of Contents for C1610-VE















































Search results

Summary of Contents for C1610-VE

Reviews:

Related manuals for C1610-VE

Brands by name

Popular brands

Axis C1610-VE, User Manual

Search results

Summary of Contents for C1610-VE

Reviews:

Related manuals for C1610-VE

Brands by name

Popular brands