USER MANUAL
33
_____________________________________________________________________________________________________________________
Relays
connection diagram:
Relays
output is the open collector transoptor output with load capacity 100mA /
24V. Transmitter inputs must be protected with diodes, e.g. 1N4148.
It is advised to use MS3K/P electronic board (sold separately), consisting of
RM96P transmitters, with DC24V input voltage and AC250V, 3A output.
Important notes:
1. After switching the scale on, both thresholds are set to maximum values.
2. When setting upper threshold value, pay attention that its value is not below
lower threshold value.
3.
Setting lower and upper threshold value is possible after sending appropriate
orders from computer, what is described in scale user manual.
