Axis AXIS Q1941-E PT, Installation Manual

Page: 3 / 20

waste disposal. Businesses should contact the product supplier
for information about how to dispose of this product correctly.
This product complies with the requirements of Directive
2011/65/EU on the restriction of the use of certain hazardous
substances in electrical and electronic equipment (RoHS).
China
This product complies with the requirements of the
legislative act Administration on the Control of
Pollution Caused by Electronic Information Products
(ACPEIP).
Contact Information
Axis Communications AB
Emdalavägen 14
223 69 Lund
Sweden
Tel: +46 46 272 18 00
Fax: +46 46 13 61 30
www.axis.com
Support
Should you require any technical assistance, please contact your
Axis reseller. If your questions cannot be answered immediately,
your reseller will forward your queries through the appropriate
channels to ensure a rapid response. If you are connected to the
Internet, you can:
• download user documentation and software updates
• find answers to resolved problems in the FAQ database. Search
by product, category, or phrase
• report problems to Axis support staff by logging in to your
private support area
• chat with Axis support staff (selected countries only)
• visit Axis Support at www.axis.com/techsup/
Learn More!
Visit Axis learning center www.axis.com/academy/ for useful
trainings, webinars, tutorials and guides.
English
Safeguards
Please read through this Installation Guide carefully before
installing the Axis product. Keep the Installation Guide for
further reference.
• Store the Axis product in a dry and ventilated environment.
• Avoid exposing the Axis product to vibration, shocks or heavy
pressure. Do not install the product on unstable brackets,
unstable or vibrating surfaces or walls, since this could cause
damage to the product.
• Only use applicable tools when installing the Axis product;
excessive force could cause damage to the product.
• Do not use chemicals, caustic agents, or aerosol cleaners. Use
a damp cloth for cleaning.
• Use only accessories that comply with technical specification
of the product. These can be provided by Axis or a third party.
• Use only spare parts provided by or recommended by Axis.
• Do not attempt to repair the product by yourself, contact Axis
or your Axis reseller for service matters.
• This Axis product shall be used in compliance with local laws
and regulations.
• The product shall be connected using a shielded network cable
(STP). All cables connecting the product to the network switch
shall be shielded (STP) and intended for their specific use.
Make sure that the network switch is properly grounded. See
Electromagnetic Compatibility (EMC) on page 2 for regulatory
requirements.
Transportation
• When transporting the Axis product, use the original
packaging or equivalent to prevent damage to the product.
Battery Replacement
This Axis product uses a 3.0 V CR2032 lithium battery as the
power supply for its internal real-time clock (RTC). Under normal
conditions this battery will last for a minimum of 5 years. Low
battery power affects the operation of the RTC, causing it to
reset at every power-up. A log message will appear when the
battery needs replacing. The battery should not be replaced
unless required!
If the battery does need replacing, please contact
www.axis.com/techsup for assistance.
• Dispose of used batteries according to the manufacturer's
instructions.
• Risk of explosion if battery is incorrectly replaced.
• Replace only with the same or equivalent battery, as
recommended by the manufacturer.