MAINTENANCE
NOTE: ALL MAINTENANCE WORK SHOULD BE DONE ONLY AFTER UNIT HAS BEEN
DISCONNECTED FROM THE ELECTRICAL POWER SUPPLY.
Never use a metal or stiff brush to clean the mixer. Never clean the mixer with a water
hose or any fluid pressure.
The mixer should be thoroughly cleaned daily.
Bowls and agitators should be removed from the mixer and cleaned in a link.
The transmission case and planetary mechanism should be inspected weekly for leaks,
damage, etc. Should it become necessary to repack the ball bearings, an authorized service
technician or the manufacturer should be contacted. Use of unknown grease or lubricants may
lead to damage and void the mixer warranty.
The bowl lift slideways (Figure 1-1) should be lubricated semi-annually, or more often under
heavy usage. Disconnect the unit from the power supply before removing the top housing or
apron. The
safety guard
should be inspected periodically for moisture or lubricant dripping.
Remove the cup and wipe it with a soft cloth.
CLEANING.:
The mixer should be thoroughly cleaned daily.
Bowls and agitators should be removed from the mixer and cleaned in a sink.
DO NOT use a hose to clean the mixer - it should be washed with a clean damp cloth.
The Safety Guard should be removed periodically and wiped clean. A large flat blade
screwdriver may be used to remove the drip cup
7
12000 Biscayne Blvd. Ste 108
Miami, FL 33181
Tel: 786-600-4687 Fax:786-661-4100
5659 Royalmount Ave.
Montreal, QC H4P2P9
Tel: 514-737-9701 Fax: 514-342-3854
[email protected] www.mvpgroupcorp.com
Summary of Contents for AX-M20
Page 1: ...20 20 Quart Mixer...