Axis Air |2| english
Axis Air |2| english
body, this will typically produce a poor shave and unusual sound.
Do not remove the outer foil from the outer foil unit.
6. Before cleaning the trimming blade, slide the power switch off.
Check that the trimming blade is not moving when cleaning it.
Notes: After cleaning the shaver, apply shaver oil (sold separately) to
Flex-Foil
TM
hood
screw
rear
panel
side
panel
screw
inner
cut-
Ni-Mh battery
inner case
shaver back
A
B
the outer foil surface once every 3 uses. When the shaver has not
used for a long time, be sure to clean the outer foil, inner blade and
trimming blade, and apply shaver oil to the outer foil surface.
FOR RECYCLING THE Ni-Mh BATTERY
Never disassemble the shaver to remove the Ni-Mh battery except to
dispose of the shaver.
The Ni-Mh battery in your shaver is recyclable. When you dispose of the
shaver, please take care to remove the Ni-Mh battery and recycle it.
How to remove the Ni-Mh battery
> Turn on the power switch, and run the battery down until the in-
ner blade stops moving. If the shaver is disassembled before the
recharged electricity is depleted, it may cause a shock, catch fire
and cause burns.
Summary of Contents for Air AX-5330
Page 52: ......
