AXIS 2490 User’s Manual
Configuring Your Serial Server
23
User Access Rights
As a user with
Administrator
privileges
,
you can click the
Security
button to add,
configure and delete further
usernames
and
passwords
, including ones with Administrator
privileges.
Important!
Reinstating the Factory Default Settings
In certain circumstances, it may be necessary to reinstate the Factory Default settings for
your AXIS 2490. This is performed by clicking the appropriate button within the
Administration Tools, or by pressing the Control Button. Follow the instructions below to
reinstate the product factory default settings using the Control button:
1. Switch off the AXIS 2490 by disconnecting the power cable.
2. Press and hold in the Control Button, and reconnect the power supply cable.
3. With the Control Button pressed, the Status Indicator will now flash briefly and then
go out. When the Status Indicator has been out for about 5 seconds, release the Control
Button. When the Status Indicator starts to flash again after approximately 5 seconds,
the AXIS 2490 will then have been reset to its default setttings.
Notes:
•Reinstating the original default settings will cause all of the unit’s parameters to be reset.
•It is also possible to restart the unit with the Restart Button on the the Admin pages.
•Refer to
Alternative Methods of Assigning the IP Address,
on page 15 for information on how to set the
IP number in the product.
• To restrict open access via HTTP, simply register a single authorized user: this effectively revokes the
anonymous user service and restricts access to specified users. If the anonymous user service is
satisfactory for your application, simply do not add any users.
• Please change the default password for the Administrator (root) as soon as possible. This will enable
the unit’s security function.
Summary of Contents for 2490
Page 1: ...User s Manual ...
