Axis 1650, Setup Instructions, Page: 7 / 16

ENGLISH
5
Assign IP Address
(contd.)
6. IP JumpStarter Setup will appear, click
[Next].
7. To install in the default destination
folder, click [Next], otherwise select
another destination folder and continue.
8. A system requirement diagnostic will run
to ensure needs are sufficient, click
[Next].
9. IP JumpStarter will install, once com-
pleted be sure to check the action
Create
a shortcut to AXIS IP JumpStarter on
your desktop . Click [Next], then [Finish].
10. Open IP JumpStarter. Select the AXIS
1650 from the serial number list. All
AXIS1650 appear with the default IP
address 192.168.0.90. If you are install-
ing several AXIS 1650, check the serial
number to locate a specific AXIS 1650.
11. Select
Server | Set IP Address
and the
Set IP Address window appears.
12. Click the radio button that corresponds
to your choice of IP setting method
(static or dynamic using DHCP). When
assigning a static IP address you also
have to define the Subnet Mask and
Default Gateway.
13. Click [OK] to save your settings.
14. You may be prompted to enter the server
root password (by default set to
<blank>), click [OK] and the AXIS 1650
will appear in the list with the assigned
IP address.
15. To verify that you have access to the
AXIS 1650’s Web pages, highlight the
AXIS 1650 in the list and select
Server |
Server Home Page
.