Axis 140 BJC Quick Installation Manual Download Page 3

NetWare

By following the instructions detailed below, install your AXIS 
PrintPoint 140 BJC with the AXIS NetPilot™ Installation Wizard, 
supplied on the AXIS Utilities Diskette. Please note that AXIS 
NetPilot™ software requires a Windows platform that uses 
NetWare or NetBIOS/NetBEUI. 

1. Load the AXIS NetPilot™ software by following the instructions 

on the label of the AXIS Utilities diskette. After loading the 
software, double-click on the AXIS NetPilot™ icon. AXIS 
NetPilot™ then scans the network for all connected Axis 
Network Print Servers.

2. AXIS Units previously installed using the AXIS NetPilot™ 

appear as ‘Network Print Servers’ and un-installed units are 
featured as ‘New Axis Units’. Select your AXIS PrintPoint 140 
BJC from the ‘New Axis Units’ sub-folder and then click on the 
Install icon. The Installation Wizard guides you through the 
basic installation.

Click the Help icon should you require assistance throughout any 
stage of the operation.

To set up print queues:

1. Open the ‘Network Print Servers’ folder and select the Network 

Print Server you wish to setup.

2. Choose ‘Network’ from the Toolbar or Setup menu.

3. A new ‘Network environments’ window will now be open. From 

this window you may create new print queues, connect to 
previously established queues, and/or select the mode of 
operation (Print Server or Remote Printer) for each printer.

To set up the advanced operating parameters:

1. Open the ‘Network Print Servers’ folder and select the Network 

Print Server you wish to setup.

2. Choose Properties from the Toolbar or Setup menu.

3. A set of ‘tabbed’ Property Pages will open which allow you to 

refine the chosen mode of operation, e.g. password protection, 
frame type selection and/or setting of the queue polling interval.

The NetWare Configuration is now complete and you can close the 
AXIS NetPilot™.

To verify that the AXIS PrintPoint 140 BJC is functioning correctly, 
we recommend that you print a document from within a Windows 
application, e.g. Microsoft Word. Please ensure that your printer is 
selected as the Active Printer.

NetWare

Summary of Contents for 140 BJC









Reviews: