2
53mm
182mm
Bend these
claws, if necessary
2
182mm
53mm
3
4
TAP
1
1
2
INSTALLATION
PRECAUTIONS
• Carefully choose the mounting location so normal driving is not hindered.
• Avoid installing the unit where it would be subject to high temperatures (direct sunlight or hot air from
the heater) or where it would be subject to dust, dirt or excessive vibration.
• Only use mounting hardware supplied for a safe and secure installation.
• Remove the front panel before installing the unit.
Mounting angle adjustment
Adjust the mounting angle to less than 20°.
MOUNTING EXAMPLE
Installation in the dashboard
Note: Keep the release key in the safe place as you may need it in future to remove the unit from the car.
Detaching and attaching the front panel
The front panel of this unit can be detached in order to prevent theft.
FOLDING DOWN AND DETACHING/ATTACHING THE FRONT PANEL
Before detaching the front panel, be sure to press the
button (1) OFF first.
Then press the
button (15), to fully open the front panel. Release the panel by pulling it towards you
as illustrated.
• Do not exert unnecessary pressure on the front panel when attaching it.
• Please use the supplied case when the front panel is removed.
CLEANING THE CONNECTOR
The unit may not function properly if the connectors
between the unit and the front panel are contaminated
with dirt. In order to prevent this from happening, detach
the front panel by pressing the
button and clean the
connector from time to time.
Clean the connector with a cotton swab together with
contact cleaner as illustrated. Be sure to clean them
carefully pin by pin and make sure not to damage the connecting points.
Cotton Swab
Rear of
front panel
Main unit
2
1
< 10°
