Burn In Menu
IN-13 tubes are subjected to a burn-in procedure during the production of the display
module. You should not perform the burn-in procedure yourself. Only after the display
module hasn't been used for a very long time, the tubes may require another burn-in.
Start burning in the tubes on the left display. IN-13 only.
Start burning in the tubes on the right display. IN-13 only.
Exit to the configuration menu.
Select the IN-13 display module you want to subject to the burn-in procedure.
Decrement the value.
Increment the value.
Select the next tube. When the last tube has been handled,
go to the first screen.
The timer starts running when a value of 2000 or higher is selected. When the timer
reaches 15:00 the system will automatically reset the value to 600. This measure
prevents a tube from being damaged in case one forgets to select the next tube.
Settings Menu
Exit to the configuration menu.
No function.
Start modifying settings.
The entry screen.
10
User Manual
Burn in
IV-26 IN-13
Right tube 5
◄► 3600 04:25
1
2
3
Burn in
IV-26 IN-13
1
2
3
1
2
3
Right tube 5
◄► 3600 04:25
1
2
3
1
3
Settings
EXIT ►
2
1
2
3
Settings
EXIT ►
Startup Menu
◄► Audio ►
Startup Standby
RGB Animation
Bus Speed
◄► OFF ►
WAVE 1 ►
◄► 160 kHz ►
Save?
YES NO BACK
Handling
Do not carry an IN-13 display module or an
IV-26 display module while holding the outer
columns, the tubes, or the horizontal top
latch that secures the tubes.
Always carry an IN-13 display module or an
IV-26 display module while holding the left
side and the right side of the base in your
hands. You can also carry the display module
with the middle of the base.
Control Module
[1]
Not used at the moment.
Installation
An Audio Visualizer system consists of a control module and one or two display modules.
Connect each display module with an UTP cable to the corresponding display port.
When a the line input is plugged in, the system visualizes the audio from the line input,
else the system visualizes the audio from the built-in microphone. The audio is outputted
User Manual
3
Left Display
Stereo Line Output
Extension Ports
[1]
Reset Button
LCD Contrast
LCD
USB Port
Menu Buttons
Microphone
Right Volume
Left Volume
Right Display
Stereo Line Input
