7
C. Powering and Installation
1. Powering the system indoors
Plug one end of the AC to DC adapter into the DC jack on the side of
the main unit, then plug the other end into the 100~240V AC power
outlet.
2. Powering the system in a car
Plug one end of the cigarette lighter adapter into the DC jack on the unit,
then plug the other end into the cigarette lighter socket.
Note: Unplug the apparatus from the power source when not in use
for an extended period of time.
3. Built-in Battery
Plug one end of the AC to DC adapter into the DC jack on the side of
the player, then plug the other end into the 100~240V AC power
outlet.Make sure the player is in
“
Power Off
”
mode.Once fully charged,
the indicated LED will turn off. At this point you may remove the wall
plug.
Note:Each full recharge takes approximately five hours and one full
charge can provide power to the player about 2.5 hours.
PDF created with FinePrint pdfFactory Pro trial version
http://www.fineprint.com
