AXIOMTEK tBOX500-510-FL Series, User Manual

Page: 18 / 48

tBOX500-510-FL Series Use
r’s Manual
Hardware Installation
10
Step 4 Unscrew the top side screws (x4) and rear side screws (x2), and then
remove the module slot cover.
.
Step 5 Insert the value-added module (VAM) as shown below. Make sure the
module is on the track and slide the module gently into the slot until it
clicks in place. Secure the module with the screws.
2.2 Installing the DDR module and Express Mini Card
Step 1 Make sure system power is off and unplug the power cord.
Step 2 Turn the tBOX500-510-FL upside down, loosen the cover screws and lift the
bracket a little bit as shown.
Step 3 Disconnect the four SATA connectors and remove the bracket