2
9416N400000E
©
Copyright 2019 Axiomtek Co., Ltd.
Version A1 January 2019
Printed in Taiwan
I/O Outlets
The following figures show the I/O outlets on the front panel of the
tBOX400-510-FL series.
▼
▼
▼
▼
Front View
Installing the HDD/SSD
Step 1
Attach a Mylar on the HDD/SSD and screw the
HDD/SSD on the tray.
Step 2
Install the SATA drive into the slot and fasten the
screw to lock the SATA drive to complete the
installation.
9416N400000E
3
©
Copyright 2019 Axiomtek Co., Ltd.
Version A1 January 2019
Printed in Taiwan
Installing the DDR Module
Step 1
Make sure the system is powered off and unplug the
power cord.
Step 2
Turn the tBOX400-510-FL upside down, loosen the
cover screws and lift the bracket a little bit as shown.
Step 3
Disconnect the four SATA connectors and remove the
bracket.
Step 4
Loosen below screws to remove the cover and put the
thermal pad on the slot.
