AXIOMTEK tBOX311-820-FL Series User Manual Download Page 41

Page: 41 / 88

tBOX311-820-FL Series User

’

s Manual

Phoenix-Award BIOS Utility



IDE Primary Master/Primary Slave

These items identify the types of each IDE channel installed in
the computer, so, IDE type is auto detection.



Video

Select the display adapter type for your system.



Halt On

This item determines whether the system will halt or not, if an error is
detected while powering up.

No errors

The system booting will halt on any errors detected.

(default)

All errors

Whenever BIOS detects a non-fatal error, the

system will stop and you will be prompted.

All, But

The system booting will not stop for a keyboard

Keyboard

error; it will stop for other errors.



Press <Esc> to return to the Main Menu page. USB Device Setting

Summary of Contents for tBOX311-820-FL Series

























































































Search results

Summary of Contents for tBOX311-820-FL Series

Reviews:

Brands by name

Popular brands

AXIOMTEK tBOX311-820-FL Series, User Manual

Search results

Summary of Contents for tBOX311-820-FL Series

Reviews:

Brands by name

Popular brands