User’s Manual
14
JCMOS1: Clear CMOS Header
Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
mainboard.
3
1
Pin 1-2 Close: (
Default)
Normal Operation.
3
1
Pin 2-3 Close:
Clear CMOS data.
Clear CMOS Procedures:
※
1. Remove AC power line.
2. Set the jumper to “Pin 2-3 close”.
3. Wait for five seconds.
4. Set the jumper to “Pin 1-2 close”.
5. Power on the AC.
6. Reset your desired password or clear the CMOS data.
SATA1: Serial ATA3 Connector
The connector connects to Serial ATA 6.0Gb/s hard disk drive and optical disc
drive.
Pin Assignment
1 GND
2 TX+
3 TX-
4 GND
5 RX-
6 RX+
7 GND
