AXIOMTEK SDM300S, User Manual

Page: 17 / 50

Intel
®
Smart Display Module (SDM-S) SDM300S
Module and Pin Assignments 11
2.4.2 Ethernet Port (LAN1)
The board has one RJ-45 Ethernet connector, LAN1. Connection can be established by
plugging one end of the Ethernet cable into this RJ-45 connector and the other end
(phone jack) to a 1000/100/10-Base-T hub.
Pin
1000
Base-T 100/10
Base-T
Description
L1 BI_DA+ TX+ Bidirectional or Transmit Data+
L2 BI_DA- TX- Bidirectional or Transmit Data-
L3 BI_DB+ RX+ Bidirectional or Receive Data+
L4 BI_DC+ N.C. Bidirectional or Not Connected
L5 BI_DC- N.C. Bidirectional or Not Connected
L6 BI_DB- RX- Bidirectional or Receive Data-
L7 BI_DD+ N.C. Bidirectional or Not Connected
L8 BI_DD- N.C. Bidirectional or Not Connected
B
Active Link LED (Yellow)
Off: No link
Blinking: Data activity detected
A
Speed LED
1000: Orange
100/10: Green/OFF