AXIOMTEK SBC86834 Series, User Manual

Page: 29 / 98

SBC86834 All-In-One Mini ITX Board User’s Manual
Jumpers and Connectors
23
Pin Signal Pin Signal
21
NC
22
Ground
23
TLC+
24
TLC-
CN8B
2.4.4 LVDS Backlight Connector (CN23)
This is a 7-pin connector for inverter on the board that we strongly
recommend you to use the matching DF13-7S-1.25C connector.
Pin Signal
1 +12V
2 +12V
3 +5V
4 ENABLE
5 GND
6 GND
7 GND
2.4.5 Ethernet with USB Connectors (CN11, CN14)
The board is equipped with two high performance Plug and Play
Ethernet interface fully compliant with the IEEE 802.3 standard. To
connect the board to 10-Base-T, 100-Base-T or 1000 Base-T hub, just
plug one end of cable to the Ethernet connector and connect the other
end (phone jack) to a 10-Base-T, 100-Base-T or 1000 Base-T hub.
The lower double-deck USB Connector (
CN11B, CN14B ) supports
USB 2.0 compliant (480Mbps) that can be connected to any USB
peripherals, such as keyboard, mouse, scanner