AXIOMTEK SBC86831 Series, User Manual

Page: 61 / 78

SBC86831 Series All-In-One Mini ITX Board User’s Manual
Award BIOS Utility 55
detection of the optimal number of block read/writes per sector the
drive can support.
¾ IDE DMA transfer access
Automatic data transfer between system memory and IDE
device with minimum CPU intervention. This improves data
throughput and frees CPU to perform other tasks.
¾ On-Chip Primary/Secondary PCI IDE
The integrated peripheral controller contains an IDE
interface with support for two IDE channels. Select Enabled
to activate each channel separately. The default value is
“Enabled” .
NOTE: Choosing Disabled for these options willautomatically
remove the IDE rimaryMaster/Slave PIO and/or IDE
Secondary Master/Slave PIO items on the menu.
¾ IDE Master/Slave PIO
The four IDE PIO (Programmed Input/Output) fields let you
set a PIO mode (0-4) for each of the four IDE devices that
the onboard IDE interface supports. Modes 0 to 4 provide
successively increased performance. In Auto mode, the
system automatically determines the best mode for each
device.
¾ IDE Master/Slave UDMA
Select the mode of operation for the IDE drive. Ultra DMA-
33/66/100/133 implementation is possible only if your IDE
hard drive supports it and the operating environment
includes a DMA driver. If your hard drive and your system
software both support Ultra DMA-33/66/100/133, select Auto
to enable UDMA mode by BIOS.
Press <Esc> to return to the Integrated Peripherals page, and press
it again, return to the Main Menu page.