AXIOMTEK SBC86822 Series, User Manual

Page: 36 / 82

SBC86822 Series All-In-One Mini ITX Board User’s Manual
Jumpers and Connectors
30
2.4.5 USB1/USB2 Connectors (CN8, CN11)
These Universal Serial Bus (USB) connectors on this board are for
installing versatile USB interface peripherals. These are 10-pin
standard USB connectors.
Pin Signal Pin Signal
1 +5V 2 +5V
3 USB D0- 4 USB D1-
5 USB D0+ 6 USB D1+
7 Ground (GND) 8 Ground (GND)
9 Ground (GND) 10 Ground (GND)
CN8
Pin Signal Pin Signal
1 +5V 2 +5V
3 USB D2- 4 USB D3-
5 USB D2+ 6 USB D3+
7 Ground (GND) 8 Ground (GND)
9 Ground (GND) 10 Ground (GND)
CN11
2.4.6 Ethernet with USB Connectors (LAN1, LAN2)
The SBC86822 Series has three layers of GIGA Ethernet & USB
Connectors (CN9, CN12).
The RJ-45 connector is for Ethernet. To connect the board to a 100/10
Base-T hub, just plug one end of the cable into
CN9A and CN12A , and
connect the other end (phone jack) to a 1000/100/10-Base-T hub.
The lower double-deck USB Connector ( CN9B, CN12B ) supports USB
2.0 compliant (480Mbps) that can be connected to any USB
peripherals, such as keyboard, mouse, scanner.
Please refer to the pin assignment list next page.