AXIOMTEK SBC8243, User Manual

Page: 63 / 94

SBC8243 All-in-One Half-size CPU Card Series User’s Manual
Award BIOS Utility
)4
NOTE:
The specifications of your drive must match with
the drive table. The hard disk will not work
properly if you enter incorrect information in
these fields. If your hard disk drive type is not
matched or listed, you can use Type User to
define your own drive type manually.
CYLS number of cylinders
HEAD
number of read/write heads
PRECOMP
write precompensation
LANDZ
landing zone
SECTORS
number of sectors
MODE
(for IDE HDD only):
Auto
Normal (HD < 528MB)
Large (for MS-DOS only)
LBA (HD > 528MB and
supports Logical
Block Addressing)
!" Drive A / Drive B
These fields identify the types of floppy disk drive A or drive B that has
been installed in the computer. The available specifications are:
360K, 5.25 in 5.25 inch PC-type standard drive; 360Kb capacity
1.2M, 5.25 in 5.25 inch AT-type high-density drive; 1.2MB capacity
720K, 3.5 in 3.5 inch double-sided drive; 720Kb capacity
1.44M, 3.5 in
3.5 inch double-sided drive; 1.44MB capacity
2.88M, 3.5 in 3.5 inch double-sided drive; 2.88MB capacity
!" Video
This field selects the type of adapter used for the primary system
monitor that must match your video display card and monitor. Although
secondary monitors are supported, you do not have to select the type
in Setup.
You have two ways to boot up the system:
("
When VGA as primary and monochrome as secondary,
the selection of the video type is “VGA Mode”.
("
When monochrome as primary and VGA as secondary,
the selection of the video type is ”Monochrome mode”.