AXIOMTEK SBC81872 User Manual Download Page 61

Page: 61 / 73

SBC81872 Socket479 All-in-One CPU Card Series User’s Manual

Award BIOS Setup

7.7

Power Management Setup

The Power Management Setup allows you to save energy of
your system effectively. It will shut down the hard disk and turn
OFF video display after a period of inactivity.

ACPI Function

This item allows you to enable/disable the Advanced
Configuration and Power Management (ACPI).

The choice:

Enabled, Disabled.

Power Management

This item allows you to select the Power Management mode.
The choice: User Define, Min Saving, Max Saving.

Video Off Method

In suspending, this item allows you to select the CRT closed
method under APM mode.
The choice: Blank Screen, V/H SYNC+Blank, DPMS

Video Off In Suspend

This option is used to determine whether the video is turned off
when the system enters sleep mode. The seeting values are “ No
“ and “ Yes “.

Summary of Contents for SBC81872










































































Search results

Summary of Contents for SBC81872

Reviews:

Related manuals for SBC81872

Brands by name

Popular brands

AXIOMTEK SBC81872, User Manual

Search results

Summary of Contents for SBC81872

Reviews:

Related manuals for SBC81872

Brands by name

Popular brands