SBC81200 LGA775 CPU Card Series User’s Manual
Installation 11
Chapter 3
Installation
This chapter describes the hardware installation procedures on
the
SBC81200
all-in-one LGA775 CPU card. The following is a
list of typical peripherals required to build a minimum system:
Power
supply
and
passive backplane
IBM
™
PC/AT keyboard
Display
monitor
Floppy or hard disk with MS-DOS or Flash Disk emulator
3.1 System
Memory
The
SBC81200
industrial CPU card supports two 184-pin DDR
sockets for a maximum total memory up to 2GB.
3.2 CPU
Installation
This processor is intended to be professionally installed. Before
installing the processor, please review the additional integration
notes available at http:/www.intel.com/go/integration. Take proper
electrostatic dis-charge(ESD)precautions suchas using
appropriate ground straps, gloves and ESD mats.
1.Open socket lever by pushing level down and away from
socket (A). Lift lever (B).
