AXIOMTEK PICO50R, User Manual

Page: 19 / 82

PICO50R/51R Pico-ITX Board
Board and Pin Assignments 13
2.4.1 LVDS +3.3V/+5V/+12V Voltage Selection (JP1)
The board supports voltage selection for flat panel displays. Use these jumpers to set
LVDS connector (CN4) pin 1~6 VCCM to +3.3V, +5V or +12V. To prevent hardware
damage, before connecting please make sure that the input voltage of flat panel is
correct.
2.4.2 Restore BIOS Optimal Defaults (SW1)
Use SW1 to clear CMOS. Press the tact switch for at least 3 second to restore BIOS
optimal defaults.
2.4.3 Auto Power On (SSW1)
If SSW1 is enabled for power input, the system will be automatically power on without
pressing soft power button. If SSW1 is disabled for power input, it is necessary to
manually press soft power button to power on the system.
Function Setting
+3.3V level (Default) 1-2 close
+5V level 2-4 close
+12V level 5-6 close
Function Setting
Normal (Default) Release
Restore BIOS optimal defaults Press
Function Setting
Disable auto power on 1-2 close
Enable auto power on (Default) 2-3 close