AXIOMTEK PICO300, User Manual, Page: 27 / 96

PICO300 Pico-ITX Board
Board and Pin Assignments 21
1
1
2.5.14 Ethernet Port (LAN1)
The board has one RJ-45 Ethernet connector. Connection can be established by
plugging one end of the Ethernet cable into this RJ-45 connector and the other end
(phone jack) to a 1000/100/10-Base-T hub.
2.5.15 SATA Connector (SATA1)
This Serial Advanced Technology Attachment (Serial ATA or SATA) connector is for
high-speed SATA interface port. It is a computer bus interface for connecting to devices
such as hard disk drives.
2.5.16 CMOS Battery Connector (BAT1)
This connector is for CMOS battery interface.
Pin Signal Pin Signal
L1 MDI0P L5 MDI2P
L2 MDI0N L6 MDI2N
L3 MDI1P L7 MDI3P
L4 MDI1N L8 MDI3N
A Active LED (Yellow)
B
100 LAN LED (Green) / 1000 LAN LED
(Orange)
Pin Signal
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND
Pin Signal
1 +3.3V
2 GND