AXIOMTEK OPS860-HM Series, User Manual

Page: 3 / 72

iii
Safety Approvals

CE Marking

FCC Class A

FCC Compliance
This equipment has been tested in compliance with the limits
for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are meant to provide reasonable protection
against harmful interference in a residential installation. If not
installed and used in accordance with proper instructions, this
equipment might generate or radiate radio frequency energy
and cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following methods:
1. Increase the separation between the equipment and receiver.
Connect the equipment to another outlet of a circuit that
doesn
’
t connect with the receiver.
2. Consult the dealer or an experienced radio/TV technician for help.
Shielded interface cables must be used in order to comply with the
emission limits.