AXIOMTEK NANO820, User Manual

Page: 25 / 73

NANO840/842 Nano-ITX Board
Board and Pin Assignments 19
LAN
USB
CN13 (for LAN2, USB 2.0 port 4 and 5):
2.4.11 VGA Connector (CN14)
This is a 15-pin D-Sub connector which is commonly used for VGA display. This VGA
interface configuration can be configured via software utility.
2.4.12 DC Power Jack (CN16)
This is a DC power jack with lock. Firmly insert at
least 60W adapter into this connector. Loose
connection may cause system instability and make
sure all components/devices are properly installed
before connecting this power jack.
Pin LAN Signal Pin LAN Signal
L1 MDI0+ L5 MDI2-
L2 MDI0- L6 MDI1-
L3 MDI1+ L7 MDI3+
L4 MDI2+ L8 MDI3-
A 100 LAN LED (Green) / 1000 LAN LED (Orange)
B Active LED (Yellow)
Pin USB Signal Pin USB Signal
1 USB VCC (+5V level) 5 USB VCC (+5V level)
2 USB #4_D- 6 USB #5_D-
3 USB #4_D+ 7 USB #5_D+
4 GND 8 GND
Pin Signal Pin Signal
1 Red 2 Green
3 Blue 4 N.C.
5 GND 6 DETECT
7 GND 8 GND
9 VCC 10 GND
11 N.C. 12 DDC DATA
13 Horizontal Sync 14 Vertical Sync
15 DDC CLK