NA342 Series Network Appliance U
ser’s Manual
Hardware Description
7
CHAPTER 2
HARDWARE DESCRIPTION
The NA342 Series are convenient for your various hardware configurations. The chapter 2 will
help you get familiar with the hardware.
2.1 Checklist
The package bundled with your NA342 Series should contain the following items
DC Power Adapter x 1,Power cord x 1
Mounting screws for disk drive
Cable kits (1 x SATA cable, 1 x SATA power cable)
Plastic stand for stack
–up x 4
If you cannot find this package or any items are missing, please contact AXIOMTEK
distributors immediately. If you order any optional components, the package might
contain those additional hardware or documents accordingly.
2.2 Memory Module (SODIMM)
The main board supports one DDR3L 1333 SODIMM socket. Maximum memory capacity is
up to 8 GB Non-ECC / Non-butter memory
The following steps show you how to install the memory modules:
1.
Push down each side of the SODIMM socket.
2.
Align the memory module with the socket that notches of memory module must match
the socket keys for a correct installation.
3.
Install the memory module into the socket and push it firmly down until it is fully seated.
The socket latches are levered upwards and clipped on to the edges of the DIMM.
4.
Install any remaining SODIMM modules.
2.3 Hard Disk Installation (2.5
’)
When you install 2.5
’
HDDif the height is 9mm, we suggest fastening the screws at
both of right and left side. If the height is 15mm , please fasten the screws at bottom
of the bracket.