AXIOMTEK NA-320 Series, User Manual, Page: 27 / 67

NA-320 Series Network Appliance User’s Manual
Hardware Description
21
2.4 Jumper Settings
This section provides the information about jumpers and connectors of
NA-320 Series
. Proper jumper settings configure the main board in this
appliance to meet your application purpose. We are herewith listing a
summary table of all jumpers and default settings for onboard devices,
respectively.
Jumper Definition
Jumper
Settings
Function
JP1
TACT SW2
Selection
Short (1-2) Power On/Off
Short (3-4) Reset(Default)
Short (5-6) GPI
JP2/JP3
LAN By-Pass
Trigger 1/2
Short/Open
LAN5 & LAN6 Bypass Trigger 1
GPO Low Level (By Pass Enable)
Open/Short
LAN5 & LAN6 Bypass Trigger 2
GPO High Level (By Pass
Disable)(Default)
JP4
LAN By-Pass
Function
Short (1-2) LAN5 & LAN6 Bypass Always Disable
Short (2-3) LAN5 & LAN6 Bypass Always Enable
Open
LAN5 & LAN6 Bypass control by JP2 or
JP3 or WDT(appendix A)(Default)
JP5
Compact
Flash Power
Selection
Short (1-2) CF Voltage Select : 3.3V(Default)
Short (2-3) CF Voltage Select : 5V
JP6
Clear CMOS
Setting
Short (1-2) Normal(Default)
Short (2-3) Clear BIOS CMOS
JP7
Auto Power
Button Mode
Selection
Open Auto Power On (Default)
Short Power on By Power button