2
9416N300000E
©
Copyright 2018 Axiomtek Co., Ltd.
Version A1 December 2018
Printed in Taiwan
I/O Outlets
The following figures show the I/O outlets on the front panels of the
tBOX300-510-FL series.
▼
▼
▼
▼
Front View
Installing the HDD/SSD
Step 1 Attach a Mylar on the HDD/SSD and screw the HDD/SSD
on the tray.
Step 2 Insert the tray into the SATA drive to finish the installation.
9416N300000E
3
©
Copyright 2018 Axiomtek Co., Ltd.
Version A1 December 2018
Printed in Taiwan
Installing the Value-added module
Step 1 Unscrew the rear side screws (x2) and then remove the
value-added module slot cover.
Step 2 Insert the value-added module (VAM) as shown below.
Make sure the module is on the track and slide the
module fully into the slot.
Step 3 Secure the module by fastening the screws to finish the
installation.
