AXIOMTEK IPC970, User Manual

Page: 31 / 91

IPC970 Series U
ser’s Manual
Introduction 23
1.7.10 LAN Connector (CN13)
The system has two RJ-45 connectors: LAN1 and LAN2. Ethernet connection can be established
by plugging one end of the Ethernet cable into this RJ-45 connector and the other end (phone
jack) to a 1000/100/10-Base-T hub.
Pins
1000
Base-T
100/10
Base-
T
Descriptions
L1 BI_DA+ TX+ Bidirectional or transmit Data+
L2 BI_DA- TX- Bidirectional or transmit Data-
L3 BI_DB+ RX+ Bidirectional or receive Data+
L4 BI_DC+ N.C. Bidirectional or not connected
L5 BI_DC- N.C. Bidirectional or not connected
L6 BI_DB- RX- Bidirectional or receive Data-
L7 BI_DD+ N.C. Bidirectional or not connected
L8 BI_DD- N.C. Bidirectional or not connected
Status LED Status
No Link OFF
Link Yellow
Data activity Yellow blinking
1G link speed LED Status
10Mb/s connection OFF
100Mb/s connection Green
1Gb/s connection Orange
2.5G link speed LED
Status
10Mb/s or 100Mb/s
connection
OFF
1Gb/s connection Green
2.5Gb/s connection Orange