AXIOMTEK IPC970 User Manual Download

Page: 75 / 91

IPC970 Series U

ser’s Manual

AMI BIOS Uitlity

⚫

SATA and RST Configuration

You can read the currently installed hardware configurations from the SATA ports in the SATA
Configuration menu. During system boot up, BIOS will detect the present SATA devices
automatically.

➢

SATA Controller(s)

Enable or disable the SATA Controller feature. The default is Enabled.

➢

SATA Mode Selection

Determine how SATA controller(s) operate. Operation mode options are RAID and AHCI

(Advanced Host Controller Interface). The default is the AHCI mode.

➢

SATA Controller

Speed Indicates the maximum speed the SATA controller can support.

➢

Hot Plug

Designates this port as Hot Pluggable.

➢

Spin Up Device

If enabled for any of the ports, Staggerred Spin Up will be performed and only the drives that

have this option enabled will spin up at boot. Otherwise all drives spin up at boot.

Summary of Contents for IPC970




























































































Search results

Summary of Contents for IPC970

Reviews:

Related manuals for IPC970

Brands by name

Popular brands

AXIOMTEK IPC970, User Manual

Search results

Summary of Contents for IPC970

Reviews:

Related manuals for IPC970

Brands by name

Popular brands