AXIOMTEK IPC962-511-FL Series User Manual Download Page 99

Page: 99 / 104

IPC962/IPC964 Series U

ser’s Manual

Configuring SATA For RAID

2.2.

Save and exit the BIOS Setup.

3. Configuring RAID by the RAID BIOS.

Enter the RAID BIOS setup utility to configure a RAID array. Skip this step and proceed if
you do not want to create a RAID.

3.1.

After the POST memory testing and before the operating system booting, a message

"Press

<Ctrl-I> to enter Configuration Utility" shows up. Press <Ctrl + I> to enter the

RAID BIOS setup utility.

3.2.

After you press <Ctrl + I>, the Create RAID Volume

screen will appear. If you want to

create a RAID array, select the Create RAID Volume

option in the Main Menu and press

<Enter>.

Summary of Contents for IPC962-511-FL Series









































































































Search results

Summary of Contents for IPC962-511-FL Series

Reviews:

Related manuals for IPC962-511-FL Series

Brands by name

Popular brands

AXIOMTEK IPC962-511-FL Series, User Manual

Search results

Summary of Contents for IPC962-511-FL Series

Reviews:

Related manuals for IPC962-511-FL Series

Brands by name

Popular brands