AXIOMTEK IMB700 User Manual Download Page 47

Page: 47 / 74

IMB700 LGA4189 ATX Motherboard

AMI BIOS Setup Utility

⚫

CSM (Compatibility Support Module) Configuration

This screen displays CSM information.

CSM Support

Enabled / Disable CSM Support.

GateA20 Active

UPON REQUEST - GA20 can be disabled using BIOS services. ALWAYS - do not allow
disabling GA20. This option is useful when any RT code is executed above 1MB.

Option ROM Messages

Set display mode for Option ROM.

INT19 Trap Response

BIOS reaction on INT19 trapping by Option ROM: IMMEDIATE - execute the trap right
away; POSTPONED - execute the trap during legacy boot.

HDD Connection Order

OS requires HDD handles to be adjusted, i.e., OS is installed on driver.

PCIe LAN IO Resource

The user can choose to disable or enable this function.

Boot option filter

This option controls Legacy/UEFI ROMs priority.

Network

Controls the execution of UEFI and Legacy Network OpROM.

Storage

Controls the execution of UEFI and Legacy Storage OpROM.

Summary of Contents for IMB700











































































Search results

Summary of Contents for IMB700

Reviews:

Brands by name

Popular brands

AXIOMTEK IMB700, User Manual

Search results

Summary of Contents for IMB700

Reviews:

Brands by name

Popular brands