AXIOMTEK IFB125, Hardware User Manual

Page: 9 / 24

IFB125 U
ser’s Manual
Introduction
1
CHAPTER 1
INTRODUCTION
This chapter contains general information and detailed specifications of the IFB125. The
Chapter 1 includes the following sections:
 General Description
 System Specification
 Dimensions
 I/O Outlets
 Packing List
1.1 General Description
IFB125 cost-effective din-rail fanless embedded system utilizes the low power RISC-
based module (iMX6UL) processor and is designed to withstand temperatures
ranging from -40
℃
to +70
℃
for using in extreme operating environment and
industrial automation applications .
IFB125 features 2 RS-232/422/485 serial ports, dual LANs, 1 DIO Port (2-In/1-Out), 1
eMMC onboard 8GB for storage. Its vertical din-rail form factor makes it easy to
install the system in a small cabinet. Due to the RISC -based architecture, IFB125 will
not generate a lot of heat while being operated.
 Features
 Fanless
 Wide temperature operation of -40
℃
- +70
℃
 Low power RISC-based module (i.MX6UL), 528MHz Processor

2 x 10/100Mbps Ethernets with magnetic isolation protection
 1 x COM Ports
 1 x SPI
 1 x I2C
 1 x Power output(3.3V@0.5A)
 1 x USB 2.0 with power distribution control and over current protection
 1 x DIO Port (2-In/1-Out) with Wet contacts
 1 x Console Port for debug settings
 1 x Watchdog Timer

LED Indicators (for user config)
 Storage:
Support one eMMC 8GB onboard (for boot disk)
 1 power paths with terminal block and 9
–48VDC
 Din-rail mounting