AXIOMTEK GOT5100T-845 User Manual Download Page 51

Page: 51 / 60

GOT5100T-845

User’s Manual

Drivers Installation

Section 4

Drivers Installation

4.1 System

GOT5100T-845 supports Windows 7, Windows 8/8.1, WES 7 and WE8S. To facilitate the
installation of system driver, please carefully read the instructions in this chapter before start
installing.

4.1.1 Driver Content

Please download the following GOT5100T-845 driver from Axiomtek official website

”.

CAUTION: Running the USB3.0 Utility before WIN 7 installation.

1. Download and unzip the Windows 7 USB 3.0 Creator utility to a temporary folder on the

Admin system.

2. Connect the USB device containing the Windows 7 image to the Admin system.
3. Right-click the file

Installer_Creator.exe

and select

Run as administrator

4. Browse to the root of the USB drive.
5. Click

Create Image

to begin the creation process.

6. Wait for the process to finish. It can take up to 15 minutes.

Summary of Contents for GOT5100T-845





























































Search results

Summary of Contents for GOT5100T-845

Reviews:

Related manuals for GOT5100T-845

Brands by name

Popular brands

AXIOMTEK GOT5100T-845, User Manual

Search results

Summary of Contents for GOT5100T-845

Reviews:

Related manuals for GOT5100T-845

Brands by name

Popular brands