GOT3177T-834-FR
User’s Manual
12
Hardware and Installation
Step 2
Remove the back cover.
2.3 Jumper and Switch Setting
Jumper is a small component consisting of jumper clip and jumper pins. Install jumper clip on 2
jumper pins to close. And remove jumper clip from 2 jumper pins to open. The following
illustration shows how to set up jumper.
Before applying power to GOT3177T-834-FR, please make sure all of the jumpers and switch
are in factory default position. Below you can find a summary table and onboard default
settings.
Jumper
Description
Setting
JP7
Auto Power On
Default: Disable
2-3 close
JP8
Restore BIOS Optimal Defaults (Clear CMOS)
Default: Normal Operation
1-2 close
JP6
Switches mSATA or
CFast
TM
setting.
Default:
1-2 = CFast™, 2-3 = mSATA
1-2 close
Summary of Contents for GOT3177T-834
