GOT-2770S User’s Manual
2.3.6 Dip Switch
Pin1 Pin2 Mode
OFF OFF Normal
ON
OFF Touch Screen Calibrate mode
OFF ON Boot Loader mode
Pin3,4 unused
Touch Screen Calibrate mode: In this mode when you power
on the GOT-2770S, the screen will display a “+” sign at the
center of the screen. Use a stylus or finger to push the center
of the “+” until it moves. The “+” moves to upper-left, lower-left,
lower-right and upper-right corners. When all five “+” are done
the “+” will disappear. The Touch Screen parameter will store at
Flash Rom.
Boot Loader mode: Load new Windows CE image file.
If the GOT-2770S already load the CE image with boot loader.
Set the DIP SW2 ON then power ON into boot loader mode.
Refer the load Win CE image document.
Installation Instructions
19
