AXIOMTEK EBOX630-830, User Manual

Page: 3 / 64

iii
Safety Precautions
Before getting started, read the following important cautions.
1. The EBOX630-830 does not come equipped with an operating
system. An operating system must be loaded first before
installing any software into the computer.
2. Be sure to ground yourself to prevent static charge when
installing the internal components. Use a grounding wrist strap
and place all electronic components in any static-shielded
devices. Most electronic components are sensitive to static
electrical charge.
3. Disconnect the power cord from the EBOX630-830 before
making any installation. Be sure both the system and the
external devices are turned OFF. Sudden surge of power
could ruin sensitive components. Make sure the
EBOX630-830 is properly grounded.
4. Make sure the voltage of the power source is correct before
connecting the equipment to the power outlet.
5. Turn OFF the system power before cleaning. Clean the
system using a cloth only. Do not spray any liquid cleaner
directly onto the screen.
6. Do not leave this equipment in an uncontrolled environment
where the storage temperature is below -2
0℃
or above 6
0℃
.
It may damage the equipment.
7. Do not open the system’s back cover. If opening the cover for
maintenance is a must, only a trained technician is allowed to
do so. Integrated circuits on computer boards are sensitive to
static electricity. To avoid damaging chips from electrostatic
discharge, observe the following precautions:
z
Before handling a board or integrated circuit, touch an
unpainted portion of the system unit chassis for a few
seconds. This will help to discharge any static electricity
on your body.
z
When handling boards and components, wear a
wrist-grounding strap, available from most electronic
component stores.