©Copyright 2019 Axiomtek Co., Ltd.
Version A1 Jan 2019
Printed in Taiwan
9416K625030E
2
I/O Outlets
The following figures show you I/O outlets on front and rear panels of the
eBOX625-312-FL Series.
Front View
Rear View
©Copyright 2019 Axiomtek Co., Ltd.
Version A1 Jan 2019
Printed in Taiwan
9416K625030E
3
Installing of the 2.5" SATA Device
Step 1 Turn off the system, and unplug the power cord.
Step 2 Turn the system upside down to locate screws at the side of
the system, and then loosen two screws and four foot pads.
Step 3 Remove the bottom cover.
Step 4 Please prepare HDD/SSD and four M3*4L screws and then
assembly the HDD/SSD with the bracket.
Step 5 Connect the power and SATA cable directly and then make
sure the insertion is complete.
Note: Please notice the direction of connector for HDD/SSD.
Step 6 Put the bottom cover back and fasten all screws.
