AXIOMTEK eBOX623-831-FL Series, User Manual

Page: 46 / 90

eBOX623-831-FL Series U
ser’s Manual
Jumper Setting & Connector
38
3.2.1 Auto Power On
If JP1 is enabled for AC power input, the system will be automatically power on without
pressing soft power button. If JP1 is disabled for AC power input, it is necessary to manually
press soft power button to power on the system.
The function is also used to simulate AT mode when set as Enable.
3.2.2 COM2 RS-232/422/485 Mode Setting
Use JP5, JP6, JP7 to set COM2 port to operate as RS-232, RS-422 or RS-485
communication mode.
Function Setting
Disable auto power on (Default) 2-3 close
Enable auto power on 1-2 close
Function Setting
RS-232
mode
(Default)
JP5 1-2 close
JP6 3-5, 4-6 close
JP7 3-5, 4-6 close
RS-422
mode
JP5 3-4 close
JP6 1-3, 2-4 close
JP7 1-3, 2-4 close
RS-485
mode
JP5 5-6 close
JP6 1-3, 2-4 close
JP7 1-3, 2-4 close