eBOX560-500-FL Series U
ser’s Manual
Introduction
5
1.3.2 Wall mount Bracket Dimension
Instruction
Step 1: Screw the two pieces of wall-mount kits to the bottom plate of the device. Total four
screws (
metric 3 x6
) are required.
Step 2: Use the device, with wall mount plate attached, as a guide to mark the correct
locations of the four screws.
Step 3: Insert a tapping-screw (
thread diameter less than 4mm
) head through middle of the
keyhole-shaped aperture on the plate, and then slide the device downwards. Tighten the
screw head for added stability.
