eBOX100-51R-FL Series u
ser’s Manual
Jumper & Connector Settings
28
3.3.9 Digital I/O Connector (CN14)
This is a 2x3-pin (pitch=2.0mm) connector. The system default
doesn’t support DI/DO
features, but the main board is reserved with a 4-bit digital I/O that meets requirements for a
system customary automation control. The digital I/O can be configured to control cash
drawers and sense warning signals from an Uninterrupted Power System (UPS), or perform
store security control. You may use software programming to control these digital signals.
3.3.10 CMOS Battery Connector (BAT1)
This is a 2-pin (pitch=1.25mm) wafer connector for CMOS battery interface.
Pin
Signal
Pin
Signal
1
DIO 0
2
DIO 3
3
DIO 1
4
DIO 2
5
+5V
6
GND
Pin
Signal
1
BAT1(+3V level)
2
GND
1
