CEB94022 COM Express
TM
Type 6 with MXM Application Board
Board and Pin Assignments
9
2.4
Jumper Settings
Jumper is a small component consisting of jumper clip and jumper pins. Install jumper clip on 2
jumper pins to close. And remove jumper clip from 2 jumper pins to open. Below illustration
shows how to set up jumper.
Properly configure jumper settings on the CEB94022 to meet your application purpose. Below
you can find a summary table of all jumpers and onboard default settings.
Note
Once the default jumper setting needs to be changed, please do it under power-off
condition.
Jumper
Description
Setting
JP1
LVDS Voltage Selection
Default: +3.3V
1-2 Close
JP2
Restore BIOS Optimal Defaults
Default: Normal Operation
1-2 Close
JP5
Boot BIOS Selection
Default: Boot from Module BIOS
1-3, 2-4 Close
JP6
Auto Power On
Default: Disable
2-3 Close
