AXIOMTEK CAPA520, User Manual

Page: 24 / 75

CAPA520 Intel
®
Core
TM
Processor Family 3.5
” Board
18 Board and Pin Assignments
2.5.7 Ethernet Ports (CN7 and CN8)
The board has two RJ-45 Ethernet connectors; CN7 for LAN1 with Intel
®
i219LM and
CN8 for LAN2 with Intel
®
i211AT. Ethernet connection can be established by plugging
one end of the Ethernet cable into this connector and the other end (phone jack) to a
1000/100/10-Base-T hub.
L1 L2 L3 L4 L5 L6 L7 L8
A B
A B
2.5.8 Ethernet Wafer Connector (CN9)
This is a wafer connector fully compliant with JST BM15B-SRSS-TB 15-pin
(pitch=1.0mm) for LAN3 Ethernet port interface.
It is suggested to connect AX93287 IO board to have RJ-45 connector for Ethernet
connection.
Pin
1000
Base-T 100/10
Base-T
Description
L1 BI_DA+ TX+ Bidirectional or Transmit Data+
L2 BI_DA- TX- Bidirectional or Transmit Data-
L3 BI_DB+ RX+ Bidirectional or Receive Data+
L4 BI_DC+ N.C. Bidirectional or Not Connected
L5 BI_DC- N.C. Bidirectional or Not Connected
L6 BI_DB- RX- Bidirectional or Receive Data-
L7 BI_DD+ N.C. Bidirectional or Not Connected
L8 BI_DD- N.C. Bidirectional or Not Connected
A
Active Link LED (Yellow)
Off: No link
Blinking: Data activity detected
B
Speed LED
1000: Orange
100/10: Green/OFF
Pin Signal
1 GND
2 LAN_LINK_ACT
3 LAN_VDD33
4 GND
5 MDI0+
6 MDI0-
7 MDI1+
8 MDI2+
9 MDI2-
10 MDI1-
11 MDI3+
12 MDI3-
13 GND
14 LAN_100_LED
15 LAN_1000_LED