AX93501 User’s Manual
Hardware Reference
5
2.3 Hardware Installation
Please follow these steps to install the
AX93501
card on the PCI
express bus:
1.
Remove the computer cover using the instructions from the
computer manual.
2.
Check that there is an empty PCI express slot. If there is not
an empty slot, remove a PCI express board from the
computer to make room for the
AX93501
card and take note
of the chosen slot number.
3.
Remove the blank metal plate located at the back of the
selected slot (if any). Keep the removed screw to fasten the
AX93501
card after installation.
4.
Carefully position the
AX93501
card in the selected PCI
express slot as illustrated below. If using a tower computer,
align the board with the board slots.
5.
Press the board firmly, but carefully into the connector.
6.
Anchor the board by replacing the screw.
7.
Connect device via 1394b connector.
8.
Turn on the computer.
NOTE The AX93501 can be installed in a PCI express x1, x4, x8,
and x16 slot.
