AIE100-T2NX Series U
ser’s Manual
Introduction
3
⚫
One HDMI 2.0 for display (HDMI 2.0 Resolution: up to 4096 x 2160@60Hz)
⚫
One RJ-45 connector for 10/100/1000 Base-T Ethernet port
⚫
One RJ-45 connector for 10/100/1000 Base-T PoE (IEEE 802.3af; PSE), max. up to
15.4 Watts
Note:
AIE100 is a power supply device. Two PSE devices should not be
connected together, which may cause the risk of power conflict. Correctly
connect PD Device or switch without PoE. If you need PoE switch, please find
the switch with uplink port.
⚫
One USB 2.0 and one USB 3.1 Gen1 connectors
⚫
Front-access design for ease of updating NVIDIA Jetpack
◼
One Micro USB connector for image flash only
◼
One Recovery switch
⚫
One Micro SD slot for extra storage (UHS-I compatible)
⚫
One M.2 2280 Key M with PCI-Express 2.0 x4 SSD slot for extra storage
⚫
One full-size PCI Express Mini Card slot (USB + PCI Express signal)
⚫
One Power button and one Reset button
⚫
Two Indicators LEDs (System Power, M.2 Storage)
⚫
Two SMA type connector openings for Antenna
⚫
One 12VDC Power Jack connector
