4. Instructions
4.1. Battery Installation
Uses DC3.6V lithium battery. Please follow the steps below to power on the logger for the first time. Press the
reed of the battery compartment jacket using a screwdriver, and pull off the jacket; pull out the plastic flake set
over the positive pole, then put back the compartment jacket to finish the process.
NOTE: If the battery is removed during recording, you should reset using the software, otherwise the device is
under standby status. Press the MODE to come to work interface, the LCD shows “CON”, the data is saved;
When you operate the device with the unit plug into the USB port, it is powered by the computer, in that case,
you can remove the battery; But if the device is plug out from the computer, you must install the battery and
reset the software;
4.2. Software install
Please install the included CD software. The software manual with the detailed installation steps is inside the
CD.
4.3. Activate / stop the device
After finish installing the software, plug the logger in the USB port of the PC, set up the parameters according
to the software manual. Then click “Setup” to activate the logger. After this, hold the MODE for 3s to stop the
device, with the display shows “— — —”.
4.4. Collect and Record Data
AX-DT200 has an internal EEPROM memory. Users are allowed to set up recording rate using the included
software; the logger will collect and record temperature/humidity data automatically. Press the button to check
current ambient humidity, temperature and recording status. When recording status is displayed, “Log” means
the logger is recording data; “FUL” means the memory is full, recording is stopped; “-----” means the logger is
not activated, activate the recording mode from the software interface.
4.5. Export Data
Data collected by AX-DT200 can be download to the computer using the included software, and saved as a
*.txt file. This file will list all the data recorded in the logger memory for further analysis. For detailed steps,
please refer to the software manual.
