9)
C.V. / C.C. Selection Switch.
10)
Current Limit Down Setting.
11)
Current Limit Up Setting.
12)
Output Voltage setting.
3.1. Constant current adjustment method
1)
Adjust by turning the voltage setting knob to desired voltage.
2)
Press the CV/CC setting button down to light up the CC/CV setting indicator.
3)
Use a wire to shorten the (+) and (-) terminal at the output terminal.
4)
Push the UP or DOWN button to obtain the desired current value.
5)
When pushing and hold the UP or DOWN button over 0.8 sec, the value will go up or go
down continuously.
6)
Release the shortend wire, connect the load to begin operation.
7)
The setting of current value will be stored in the EEPROM after power off.
8)
The current value will be resumed by pushing the CV/CC button when next power on.
4. Panel details – dual type
